5 Stations Bearing Type High Speed Nut Formers

5 Stations Bearing Type High Speed Nut Formers

Description

Description

Salient Features

1.Connection between the crankshaft and bed as well as the rod all adopts the world-class SKF bearing for assortment, which is of small friction, quick and flexible operation and saving power.

2.Being cast by adding the nodular cast iron with alloy contained in the bed, therefore it possesses high tensile strength and favorable wear-resistance.

3.The main slide of five-station desk uses the trapezoidal design, which is limited by the fixed and adjustable plates on both sides and simply and closely structured, by assorting with the materials of highly wear-resistant alloy steel, first-class heat treatment and the overall lubricant road, so as to maximize the high-speed operation of bearing, and it is suitable for processing ordinary nut and roller products, bringing magnificent returns for the clients.

4.Cropping system uses the guide board to drive the cutting holder, and the guide board reciprocates and the cut off force transmits directly, which is kind of high-powered, stable and good dynamic balance.

5.Equipped with the pneumatic braking, it is flexible to control and convenient to debug.

6.Configured by the fault detection device and safety protection device, if the equipment is out of order, it will be shutdown automatically, providing a maximum protection to the equipment and tools mode.

7.Installed with the backstop equipment in the feeding box, improving the feeding accuracy.

This Series Nut Former are used to produce DIN 934, 985, 1587 and so on.

Main Technical Parameters

Data

11B6S
14B6S
17B6S
19B6S
24B6S
28B6S
33B6S
Dies
5
5
5
5
5
5
5
Forging Power
Ton
60
95
120
150
250
300
400
Cut-off Dir
mm
11
16
18
20
24
27
30
Cut-off Length
mm
7
11
13
15
20
21
25
Prodcut Size
DIN
M4-M6
M8-M10
M8-M10
M10-M12
M12-M16
M12-M18
M16-M22
Output Rate
Pcs/min
300
200
180
170
120
120
80
Stroke Length
mm
50
70
80
100
110
110
200
Kickout Length
mm
13
18
20
20
35
35
35
Dies Pitch
mm
50
60
70
80
100
100
140
Main Motor
Hp
15
20
30
50
75
75
100
Air Pressure
Kg
3.5
3.5
3.5
3.5
3.5
3.5
3.5
Lubricant Pump
Hp
1
1
2
2
2
2
3
Lubricant Oil
L
3
4
5
6
8
8
10
Weight
Ton
4
8.5
10
17
23
25
38
Machine Size
M
2.15*1.55 *1.06
2.8*2.05 *1.3
3.67*2.0 *1.4
4*2.45 *1.45
5*3 *1.7
5*3 *1.7
5.5*3.0 *1.7